NP-502: RF amplifier 500-1000 MHz 150 watt
 |
|
NP Technologies Model NP-502
Designed for linear application in the 500 to 1000 MHz range. This amplifier utilizes RF Power MOSFET devices that provide high gain, wide dynamic range and an excellent 3rd order intercept point. Suggested applications: multi-carrier, pulse, AM & FM modulation.
Download complete datasheet   |
ELECTRICAL SPECIFICATION @ VDD = +28VDC: Temp.=25°C, 50Ω System
Parameter |
Symbol |
Min |
Typ |
Max |
Unit |
Operating Frequency |
BW |
500 |
- |
1000 |
MHz |
Power Output Saturated |
Psat |
- |
150 |
- |
Watt |
Power Output P-1dB |
P-1dB |
80 |
100 |
- |
Watt |
Gain |
G |
45 |
51 |
- |
dB |
Small Signal Gain Flatness |
ΔG |
- |
±1 |
±1.5 |
dB |
Input VSWR |
S11 |
- |
- |
2.0:1 |
- |
Harmonics |
H |
- |
-30 |
- |
dBc |
Inter-modulation Point
2 Tones, 0.5 watts per tone @ 380 & 381 MHz |
IP3 |
- |
+58 |
- |
dBm |
Spurious Signals |
dBc |
- |
-70 |
-60 |
dBc |
Operating Voltage |
Vdc |
24 |
28 |
28 |
Volt |
Operating Current |
Amps |
- |
16 |
2.0 |
Amp |
Enable / Disable (shut down pin: gnd=off, open=on) |
ms |
Typical 1ms off, 10ms on. |
ms |
MECHANICAL SPECIFICATIONS
Parameter |
Description |
Limits |
Units |
Dimentions |
11.25 x 9.925 x 1.94 |
Max |
Inch |
RF Connectors In / Out |
SMA in, N out |
- |
- |
DC Connectors |
Filtered feed-thru |
- |
- |
Cooling |
Heat-sink not included |
- |
- |
Weight |
9.25 |
Max |
lb |
PROTECTIONS
Thermal Shutdown |
Bi-metal switch set at 80°C with self reset. |
Typ |
Input Overdrive |
+20dBm Max |
Max |
Load VSWR |
4.0:1 up to 100 watts |
Max |
Reverse Polarity Protection |
None |
- |
ENVIRONMENTAL CHARACTERISTICS
Parameter |
Symbol |
Min |
Typ |
Max |
Unit |
Operating Case Temperature |
Tc |
0°C |
- |
50°C |
°C |
Storage Temperature |
Tstg |
-30°C |
- |
100°C |
°C |
Relative humidity non-condensation |
RH |
95 |
- |
- |
% |
|
